The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.
With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
- RCA pass-thru outputs
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- High level input capable with Auto Turn-On circuit
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- Features C.L.E.A.N. Set-up
- Infrasonic filter
- Over current protection
- Cast aluminum heatsink
- Muted turn on
- Short circuit protection
- 1 Year Warranty
- Stealth top mounted control panel
| Number of Channels |
1 |
| Total Power (Sum of Rated Power) |
1000 Watts |
| Rated Power (RMS Continuous Power) |
300 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm |
| Dynamic Power (PVC/PowerCube®) |
491 Watts x 1 @ 4-Ohms
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm |
| Bridgeable |
No |
| Frequency Response |
20Hz to 250Hz +/- 1.0dB |
| Input Sensitivity |
150 mV - 12 V |
| Circuit Topology Class |
Class BD |
| Efficiency (average) |
86% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) |
4-Ohm: <1.0% |
| Signal Input |
Hi/Low level: 1 RCA pair |
| Signal Output |
Hi/Low level: 1 RCA pair |
| Tone Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz |
| Crossover Controls |
Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED
Input Clip LED 3
Output Clip LED 1,2,3
LED Color Legend:
1 BLUE: VIOLET: 1% THD
3 RED: 10%+ THD |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Operating Voltage |
9 - 16 VDC |
| Recommended Fuse (not included) |
140 A |
| Average Current Draw (13.8V Music) |
65 A |
| Max. Current Draw (13.8V Sinewave) |
130 A |
| Suggested Alternator |
100 A |
| Dimensions (H x W x D) |
2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm) |
| Shipping Weight |
12.9 Lbs. (5.85 Kg.) |
-
-
Type:
Amplifiers
-
-
Energy Star Rated:
No
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Electronics
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
electronics
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.
