The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
The P1000X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
- 12dB/octave Butterworth crossover
- Features C.L.E.A.N. Set-up
- On-board Punch EQ with +18dB boost @ 45Hz
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- Short circuit protection
- Over current protection
- Cast aluminum heatsink
- Muted turn on
- 1 Year Warranty
- Stealth top mounted control panel
| Number of Channels |
2 |
| Total Power (Sum of Rated Power) |
1000 Watts RMS |
| Rated Power (RMS Continuous Power) |
300 Watts x 2 @ 4-Ohm
500 Watts x 2 @ 2-Ohm
1000 Watts x 1 @ 4-Ohm Bridged |
| Dynamic Power (PVC/PowerCube®) |
401 Watts x 2 @ 4-Ohms 0° Res
656 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable |
Yes |
| Frequency Response |
20Hz to 20kHz +/- 1.0dB |
| Input Sensitivity |
150 mV - 12 V |
| Circuit Topology Class |
Class A/B |
| Efficiency (average) |
69% @ 4-Ohm
64% @ 2-Ohm |
| Total Harmonic Distortion (THD+Noise) |
4-Ohm: <1.0% |
| Signal Input |
Hi/Low level: 1 RCA pair |
| Signal Output |
Low level: 1 RCA pair |
| Tone Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position |
| Crossover Controls |
High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED
Input Clip LED 3
Output Clip LED 1,2,3
LED Color Legend:
1 BLUE: VIOLET: 1% THD
3 RED: 10%+ THD |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Operating Voltage |
9 - 16 VDC |
| Recommended Fuse (not included) |
140 A |
| Average Current Draw (13.8V Music) |
70 A |
| Max. Current Draw (13.8V Sinewave) |
140 A |
| Suggested Alternator |
100 A |
| Dimensions (H x W x D) |
2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm) |
| Shipping Weight |
15 Lbs. (6.80 Kg.) |
-
-
Type:
Amplifiers
-
-
Energy Star Rated:
No
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Electronics
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
electronics
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.
