The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.
The P300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.
- 12dB/octave Butterworth crossover
- Features C.L.E.A.N. Set-up
- High level input capable with Auto Turn-On circuit
- On-board Punch EQ with +18dB boost @ 45Hz
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- Short circuit protection
- Over current protection
- Cast aluminum heatsink
- Muted turn on
- 1 Year Warranty
- Stealth top mounted control panel
| Number of Channels |
1 |
| Total Power (Sum of Rated Power) |
300 Watts |
| Rated Power (RMS Continuous Power) |
200 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm |
| Dynamic Power (PVC/PowerCube®) |
260 Watts x 1 @ 4-Ohms 0° Res
444 Watts x 1 @ 2-Ohms 0° Res |
| Bridgeable |
No |
| Frequency Response |
20Hz to 20kHz +/- 1.0dB |
| Input Sensitivity |
150 mV - 12 V |
| Circuit Topology Class |
Class A/B |
| Efficiency (average) |
74% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) |
4-Ohm: <1.0% |
| Signal Input |
Hi/Low level: 1 RCA pair |
| Signal Output |
Low Level: 1 RCA Pair |
| Tone Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position |
| Crossover Controls |
High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED
Input Clip LED 3
Output Clip LED 1,2,3
LED Color Legend:
1 BLUE: VIOLET: 1% THD
3 RED: 10%+ THD |
| Power Wire Gauge |
8 AWG to 4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Operating Voltage |
9 - 16 VDC |
| Recommended Fuse (not included) |
50 A |
| Average Current Draw (13.8V Music) |
23 A |
| Max. Current Draw (13.8V Sinewave) |
45 A |
| Suggested Alternator |
75 A |
| Dimensions (H x W x D) |
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm) |
| Shipping Weight |
9.5 Lbs. (4.30 Kg.) |
-
-
Type:
Amplifiers
-
-
Energy Star Rated:
No
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Electronics
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
electronics
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.
